 |
Its a pain getting hardware for turbo related items. I made up this list to make it a bit easier for everyone to purchase the hardware they need.
Manifold to Turbo bolt size
Drag, Rev-Hard, Inline Pro - 10mm x 1.25 [30mm] (length of the bolt)
Max-Rev - 3/8 x 24 fine thread
Turbo to Downpipe flange bolt size
T3 only 8mm x 1.25mm [20mm]
Oil return Flange bolt size
8mm x 1.25 [20mm]
35m Wastegate to manifold bolt size
8mm x 1.25 [20mm]
Stock Map Sensor Bolt
4mm x 0.7mm [15mm]
O2 sensor bung or bolt to plug it up
18mm x 1.50
Oil Return Parts list:
Oil Drain Flange 1/2"
1/2" to -10AN adapter [981610erl]
2 of 45 deg or straight -10AN swivel seal hose ends [804610erl or 800110erl]
1' to 1.5' of -10 Performo flex lines [400100erl]
Steel -10 weld on bung [967110erl]
Oil feed line part list:
1- male 1/8" BSPT to female 1/8" NPT adapter (aluminum)
1- 1/8" NPT Brass Tee adapter with one male out and two females.
1- 3.5' of -3AN lines with hose ends attach
1- straight 1/8" NPT to -3AN adapter
1- 90 deg 1/8" NPT to -3AN adapter
Top of stock fuel filter bolt size if you wanna run a SS lines to filter
12mm x 1.25
Greddy EGT probe bung thread size
1/8" NPT with 27 thread pitch |
|
